Now that the data can be properly received and decoded, we'll need an easy solution to map the location of the flight. For this, we will use a widely known tool named the habhub tracker. Firstly, close out dl-fldigi if you have it running and restart it in HAB mode. To do this, all you need to do is click on the shortcut labeled "Dl-fldigi (HAB mode)" in it's folder in the Start Menu and you should be ready to go. In the "DL Client" menu, make sure the "Online" checkbox is marked, and you should be all set. Now is the point where I send you to the Pi in the Sky registration tutorial, which has detailed, step by step instructions on what to do, and steps to troubleshoot any issues.
Once your payload appears on the map, report back here to move onto the next steps.